,
YOUR TRUST TENT STRUCTURE SOLUTION PARTNER SINCE 2005
Mobile/WhatsApp/Wechat:
0086-159-8964-5266
0086-186-6644-0599
Availability: | |
---|---|
Quantity: | |
UV protective temporary building aluminum middle church event tent
for outdoors 300 people activity
Sometime people need a quiet and airy environment for church event, and then many people will choose temporary building party tent for church activity.
As a professional event tent manufacture and designer, LP outdoors supports a series of solutions to our customers.
Only our clients give us how many persons will be accommodated in or ground size that we could suggest proper party tent size for them.
We support party tent for church event, it have not any legs inside, the ground could used 100%,in order to set up more chuch chairs and the party tent eave could hang light and lining.
If in hot summer, the party tent side walls could close and set an air conditioning inside, more comfortable for event. If in good weather, the party tent sidewalls could open to see outdoors landscape.
Structure of marquee: | |
Aluminum profile | high pressed extrued aluminum alloy 6061-T6,122X68X3mm for 10m,11m,12mwidth |
166x88x3mm for 13m, 14m. 15m, 17m, 18m width. All are anodized | |
Steel parts | hot-dipped galvanized , Passed 144 hour of salt spraying test |
Raw material of marquee | |
Top roof fabric | 850g/sqm(24 Ounce) laminate Vinyl, waterproof , fire retardant M2 |
UV protection, and Rotproof. Blackout | |
Side panels | (1) 650g/sqm(19 Ounce) laminate Vinyl, waterproof , fire retardant M2 |
UV protection, and Rotproof. Translucence. | |
(2) 5cm thickness of sandwitch solid wall, ABS Solidwall,Glass wall | |
flame retardant,Heat resistant and Rotproof. |
What advantage:
Item | Our manufactory | Some manufactories |
Side height | 3m | lower 2.7m or 2.5m |
Aluminum profile | Bigger 166x88x3mm | Smaller 122x68x2.5mm profile |
Fabric | 850g/sqm, special treated | 750g/sqm or 650g/sqm, no special treated |
Steel joints | Good welding, Spray salt resistant 144hour | Bad welding, Spray salt resistant about 80 hour |
Assembly accuracy | Bolt and holes can fit exactly and fixed | Bolt is difficult to get through hole and fixed. |
TransparencyPVC | UV Aging test, -20º C resistant | No UV Aging test, can' t be 20º Cresistant, breaken |
Sidewallaccessories | Nylon rope+Nickel Eyelet | Zippper, easy breaken. or cotton rope, easy rot |
Rachet | Bigger rachet+nylon 50mm ribbon | Small rachet+polyester ribbon, easy breaken |
Cover lappetstructure | Aluminum rails+screw bolt | Elastic rope, easy breaken and water can' t flow. |
Roof wire | 201# steel wire, stainlesss | Generally steel wire, easy stain |
Support beam | " X" brace beam, galvanized steel | port beam, thin aluminum |
Gable triangle wall | The middle is aluminum slots | The middle is velcro or rope. |
Wind loading | Wind loading 80km/h test report | No Wind loading test report |
Want to learn more specifcations and all detail structure ,please kindly link to :
https://www.lpoutdoors.com/Specification-Of-15-25m-Middle-Party-Tent-id6087176.html
UV protective temporary building aluminum middle church event tent
for outdoors 300 people activity
Sometime people need a quiet and airy environment for church event, and then many people will choose temporary building party tent for church activity.
As a professional event tent manufacture and designer, LP outdoors supports a series of solutions to our customers.
Only our clients give us how many persons will be accommodated in or ground size that we could suggest proper party tent size for them.
We support party tent for church event, it have not any legs inside, the ground could used 100%,in order to set up more chuch chairs and the party tent eave could hang light and lining.
If in hot summer, the party tent side walls could close and set an air conditioning inside, more comfortable for event. If in good weather, the party tent sidewalls could open to see outdoors landscape.
Structure of marquee: | |
Aluminum profile | high pressed extrued aluminum alloy 6061-T6,122X68X3mm for 10m,11m,12mwidth |
166x88x3mm for 13m, 14m. 15m, 17m, 18m width. All are anodized | |
Steel parts | hot-dipped galvanized , Passed 144 hour of salt spraying test |
Raw material of marquee | |
Top roof fabric | 850g/sqm(24 Ounce) laminate Vinyl, waterproof , fire retardant M2 |
UV protection, and Rotproof. Blackout | |
Side panels | (1) 650g/sqm(19 Ounce) laminate Vinyl, waterproof , fire retardant M2 |
UV protection, and Rotproof. Translucence. | |
(2) 5cm thickness of sandwitch solid wall, ABS Solidwall,Glass wall | |
flame retardant,Heat resistant and Rotproof. |
What advantage:
Item | Our manufactory | Some manufactories |
Side height | 3m | lower 2.7m or 2.5m |
Aluminum profile | Bigger 166x88x3mm | Smaller 122x68x2.5mm profile |
Fabric | 850g/sqm, special treated | 750g/sqm or 650g/sqm, no special treated |
Steel joints | Good welding, Spray salt resistant 144hour | Bad welding, Spray salt resistant about 80 hour |
Assembly accuracy | Bolt and holes can fit exactly and fixed | Bolt is difficult to get through hole and fixed. |
TransparencyPVC | UV Aging test, -20º C resistant | No UV Aging test, can' t be 20º Cresistant, breaken |
Sidewallaccessories | Nylon rope+Nickel Eyelet | Zippper, easy breaken. or cotton rope, easy rot |
Rachet | Bigger rachet+nylon 50mm ribbon | Small rachet+polyester ribbon, easy breaken |
Cover lappetstructure | Aluminum rails+screw bolt | Elastic rope, easy breaken and water can' t flow. |
Roof wire | 201# steel wire, stainlesss | Generally steel wire, easy stain |
Support beam | " X" brace beam, galvanized steel | port beam, thin aluminum |
Gable triangle wall | The middle is aluminum slots | The middle is velcro or rope. |
Wind loading | Wind loading 80km/h test report | No Wind loading test report |
Want to learn more specifcations and all detail structure ,please kindly link to :
https://www.lpoutdoors.com/Specification-Of-15-25m-Middle-Party-Tent-id6087176.html
Mobile/Whats/Wechat
0086-159-8964-5266
0086-186-6644-0599